Description
- MD070SD adopts 8080 timing sequence with 16-bit parallel bus interface, resolution of 800 × 480, display panel with 16M colour and integrated with 8-page video memory (the remaining memory could be used as extended memory). The interior of module utilizes CPLD + SDRAM mode to drive RGB interface display, which does not only realize conversion between the bus interface and RGB interface, but also provides a range of useful features.
- With regard to stability, the module is equipped with great anti-interference capability, which is far more powerful than the drive solution SSD1963 on the market, as anti-interference ability of SSD1963 is poor with risk of crashing and white screen.
- As to functions, the module provides 8-page video memory which can achieve data writing on the background, a command is enough to switch to full-screen display of data instantly, which is far more functional than drive solution RA8875on the market.
- Concerning control, as MD070SD does not need to be initialized, and a resetting operation is enough to make it work, thus those boring initialization codes which general TFT controllers require can be saved. A minimum of five register commands will be enough to make it operate normally, which greatly simplifies the codes and reduces the difficulty of debugging and probability of error.
- The control board responds very fast, which can achieve reading and writing cycle up to 200ns and the highest full-screen refreshing speed of 13 frames. The integrated 8MB SDRAM corresponds to 8-page display buffer. The display page register and reading and writing page register are set up independently, and the current display page and reading and writing page can be different pages to facilitate the achievement of full-page fast switching after being written on the background.
TFT drive timing sequence and circuit design have been optimized to ensure
accurate colour recovery, stable display, to eliminate flickering or cross
colours, and to provide LED backlight drive thus brightness can be regulated
from 0 (closed) to 16 (full).
Mega 2560 is a microcontroller board based on the ATmega2560. It contains
everything needed to support the microcontroller; simply connect it to a
computer with a USB cable or power it with an AC-to-DC adapter or battery to get
started. The Mega is compatible with most shields designed for the Duemilanove
or Diecimila.
MEGA2560 R3 uses an ATMega16U2 instead of the ATMega8U2 chip, which allows for
faster transfer rates and more memory. No drivers needed for Linux or Mac, and
the ability to have the Uno show up as a keyboard, mouse, joystick, etc. Also
adds SDA and SCL pins next to the AREF.
Note: Please contact us for codes after purchase.
