OTUAYAUTO Windshield Washer Nozzles Kit, Compatible with Honda Pilot 2009-2015, Front Windshield Wiper Spray Nozzles with Washer Fluid Hose & Connectors, Replaces OEM # 76810-SZA-A01ZA 76810-SZA-A00ZA

READ at least twice before beginning. HONDA PILOT EXL 2011 Model. Begin by turning the black sleeve on the Nozzles to release the point inside the T or L connector of the NOZZLE. To REPLACE the factory NOZZLES that have broken you will need needle nose pliers to push the two clips on the inside of the HOOD together for release. Pull the T or L connector out off the Nozzles and then pull the nozzles out of the hood from the outside. Insert the new NOZZLE from the outside to the inside. Cut a small piece (1 or 2 inches) of the NEW hose and use the STRAIT CONNECTOR (which is smaller than the T) into the original hose. The T will be placed into the other end. Use another 1.5 inch piece of new hose to connect the T to the Passenger side NOZZLE. Measure out the NEW HOSE over to the DRIVER NOZZLE ... cut with a little extra length just in case. Use the needle pliers to open up the middle clasp and take the old hose out and place the NEW hose in. Continue to hook the hose tip to the DRIVER's NOZZLE. You will have extra hose left over and a Y and Straight connector left over. You will NOT need the RUBBER seals from the original NOZZLEs. Once complete - test the system. The FIT is tight and excellent. The spray pattern is heavy. This should take 10 minutes to complete. Very Easy to do. Just plan it out and take your time. The NEW hose will connect snug. Make sure you place your finger in the back side of the new NOZZEL when applying pressure to the hose to slip it on the flange/connector. Hope this helps. Photos attached in order.

They seem to be working great and were easy to replace.

This is the third kit from Amazon, all claimed to fit OEM G2 Pilot, while none of them does. Had to remove the original connection tubes and angles and use the parts that came with the kit to “build” an all-new thing, but it worked, and the rubber hose is of very good quality, as well as the sprayers, overall pretty happy.

Quite disappointed with product. One of the two nozzles has an internal obstruction or restriction resulting in fluid just dripping out on hood. The other nozzle does work but hits windshield very high in solid stream rather than a fanned out pattern. Product has gone in the trash, waste of money and time.

Installed in minutes on 2013 Lincoln MKX. Works as advertised. Take your time and remove any sound deading material. When using supplied rubber spacer/gasket there is a snug, reassuring fitment. Parked, the aim is a little high, however at highway speeds the washer fluid delivery is spot on.

AAAAAAA+++++++++

Work perfectly described and the description highly recommended

Easy to install. Good fit. However the washer fluid stream is aimed very low. Only covers the bottom of the windshield. Better than no nozzle I guess.

the fittings were not in the package as advertised

Si le funcionó a mi carro, producto de buen material

Excelente me saco de apuros