24/25mm Aluminium Muntin Bar Glass Joiner (1m) - White

Description

24/25MM ALUMINIUM MUNTIN BAR (1m)Strong 1m long aluminium H-section for creating secure, watertight joints between 24mm glass units, or 25mm polycarbonate sheets. Features a thermal break to separate internal and external extrusions and stop condensation.Also known as 'glass joiners' this one-part bar is used to connect separate units of glass or polycarbonate sheets, and frequently used when fitting roof vents in conservatory roofs.Features & BenefitsStrong aluminium extrusionThermal break stops condensationInternally ribbed to trap sealantSecure and reliable jointHard-wearing painted finishSuits 24mm glass and 25mm polycarbonate sheetsSimple one-part H-section designFit and forget reassuranceTechnical InformationMaterial: Aluminium (with rubber thermal break)Colour: White, Brown, Anthracite Grey, White/Brown, and White/Anthracite GreyLength: 1.040m (3ft 5in)Height: 29mmWidth: 53mmFitting & UsageEnsure all surfaces, including inner faces of H-section, are clean and free from dust.Apply bead of sealant* to leading edge of inner faces of the H-section.Bring two edges flush together and push the H-section onto the glazing or roof vent. The sealant will be drawn under the H-section and create a seal.Remove any surplus sealant.Apply sealant along the H-section where it meets the outside face of glazing or roof vent.When fitting to a conservatory, apply 100mm beads of silicone to left and right, above and below muntin bar, and inline with where the top capping will meet the glazing. This seals where the gasket rides up over the muntin.* We recommend a neutral cure sealant, such as Gripbond Pro.