MAX GPE A/B Epoxy Resin Injectable Glue for RV Panel Delamination, Harden Soggy Floor, Stabilize Wood Rot, Sealer & Waterproofing Coating, Fiberglassing Resin

This product was easy to mix and use, it worked just as advertised.

It worked as expected easy to use slow set 90 minute working time to shake out nibbles and voids

This product worked great to repair fiberglass delamination from the wall of my RV. Easy to mix. Slow setting. I only wish it was a bit thinner when mixed so it could be injected better behind the fiberglass. But I managed to make it work.

It works as expected. It is very runny, so it gets into all cracks and crevices. Since it is a low viscosity epoxy, don't expect to fill with. It absorbs into wood. I used it on a motorhome. I replaced wood framing around the baggage compartment and it did a great job sealing the laminate back. It took the better part of 24 hrs to cure enough to take the clamps off.

I have worked with composites for years now. This is the first time I got a bad batch from all the brands I have purchased from. The epoxy does not full cure, and it is still soft after a whole week has passed. The seller/manufacturer of this epoxy will not respond to you for any reason. I tried to contact them on here to let them know they have a bad batch, but they refuse to get back to me. Purchase this epoxy at your own risk.

Epoxy was easy to mix and dried in 24 hours. Epoxy was very "water like" and flowed well into RV sideing to reduce delamination. Epoxy was very clear when dried (not important for RV delamination but I used leftover on a surface).

Fixed my de-lam easily. Took a little longer to set up but I didn't mix as well as I should have per instructions- follow mixing time.

Easy to mix, instructions easy to follow. REALLY HARD to push through the tube. There is no cleanup instructions, soooo, we just throughout the left overs in the tube. Dries fairly quickly.