* FITS STANDARD 2" DRAIN ONE PIECE TOILETS WITH 2 3/8″ to 2 3/4″" DIAMETER TANK DRAIN HOLE AND 5/8" TO 3/4" SQUARE BUTTON MOUNT HOLE OR 1 1/2" ROUND LID MOUNT HOLE * FlushSaver Dual-Flush DIY Conversion Kit is EASY to operate for anyone because of its modern European-style Push Button actuator. These kits replace your standard wasteful and leaky flapper mechanism with an adjustable, dual-action piston and seal evacuator column. The Push Button actuator, which replaces the standard flush lever, is split into a smaller button for those little "Number One" flushes and a larger button for higher water volume "Number Two" flushes. Both the "small flush" and "regular flush" release enough water to fully cycle and empty the bowl, but the small flush is less aggressive and uses 1/3 less water . . . adding up to over 10,000 gallons saved for an average family of four. Further, both cycles are adjustable to suit your particular tank size and water use preferences. EVERYTHING is INCLUDED to fully replace ALL of the parts inside the tank as shown. The leaky and wasteful flapper mechanism is replaced with a MODERN adjustable, dual-action piston and seal evacuator column, while the old-style ballcock valve is replaced with a QUIET and SERVICABLE filler valve.
R**S
It saved me from buying a new toilet!
We bought an off brand one piece toilet at HOBO a few years back. That was a bad idea. Anyway, when the flush valve broke , we were up $#!+ creak. Nobody carries stuff for one piece toilets. I even bought a new toilet for almost $180. ( which I was later able to return). I saw there were a number of different options available on Amazon. They were all different sizes. I measured the old piece and found this product that was for about same size hole. It went in easily and so far is working great. I'm going to order another for a backup. This may sound extreme, but it's for a cabin up north and there are extreme temperatures when we are not there. Anyway I'm not an expert, I doubt I could answer any questions, that is what made this product a great value to me.
S**K
Design of flush mount.
I had earlier purchased this which had an extended flush mount into the tank. What I received this time is a poor design that has just a large metal wing nut sitting on tank to bowl gasket. I atruggled to buy a 2.5 inch on but managed two gaskets of 2 and 3 inches that somehow fit in circles. It stopped lealing after.Where in the world they would come up with such design changes. Tgis is poor. Sorry. Stay away from this product.
W**T
Wasted a day
The flush valve didn't fit in the tank opening. Took my Dremel, ground the opening just a tad larger, the footing for the flush valve fit. Put it together. Adjusted the fill valve and the flush valve. Seemed to work well. Water leaks out of the tank into the toilet. Tried adjusting it, loosened the screw, tightened the screw. The thing is unusable.
V**T
Works for my needs
Love it
R**K
Water Conservation
I bought 2 kits. One installed and worked flawlessly! The other leaked. After several email exchanges, problem solved to an O-ring deformity. Silicone fixed the leak!! Will be conserving water and paying less on water bills.
D**N
Five Stars
either it works or it doesn't... and this works!
Trustpilot
1 month ago
1 month ago
