Description
- Improved design: 1. A cold shoe has been added to the upper right corner of the cage to facilitate the installation of accessories such as microphone 3468 and LED video light 3286; 2. At the bottom, two 1/4"-20 threaded holes with a distance of 18 mm are added, which are compatible with the SMALLRIG quick release plate for Arca 3154. A QD hole is added at the bottom, which is compatible with the QD quick release shoulder straps and other accessories.
- For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SMALLRIG Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shooting and protect the camera while offering a wide range of accessory holders. NOTE: The HDMI cable clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV as it blocks the synchro port interface when used with Alpha 7R V.
- Multiple attachment points: the cage has several 1/4 inch - 20 holes and 3/8 inch - 16 positioning holes for ARRI, which can attach accessories such as the top handle 3765, the side handle 2093 and the monitor stand 2903B. There are 2 built-in cold shoe interfaces that can install microphones, fill lights and other devices; the QD hole on the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and at the bottom of the cage, around the wrist strap PAC2456
- Three-point locking: a positioning pin is added to the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point lock to make the camera stable. Adjust the direction of left locking slider to adjust to different models, side [A7 IV] suitable for Alpha 7 IV and Alpha 7R V, side [A7S III/A1] suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV
- All-round protection: built-in all-round rubber seal to prevent scratches. When the cage is installed, the camera interface, dials, buttons and battery change are not affected. The design of the opening and closing key is added to the position of the battery compartment, which better adapts to the roundness of the fuselage, solves the problem of placing the little finger and improving the grip of the fuselage.
- Precaution - 1. Removing the split ring on the left side before using the side locking plate. 2. Please note that the camera strap eyelet is occupied when using the side locking plate. 3. HDMI Cable Clamp 3000 is not compatible with Alpha 1
SMALLRIGA7 IV/A7 S III/A1 Cage for Sony Alpha 7 IV/Alpha 7 S III/Alpha 1-3667
