Specifications:Material: resinStyle: vaseType: home decorationPlug: US plug 110V, EU plug 220V, UK plug 230V (optional).Size: about 30 x 18 x 40 cm/11.8 x 7.1 x 15.7 inchWeight: about 1700gThe installation method of the pump: (the pump has been installed when delivered)1. Connect the water pump and the water pipe, and connect them together.2. Adjust the switch size of the pump to a suitable position.3. Place the connected water pipe and pump in the correct position of the product.4. Lay the pump flat, then add water to the completely submerged pump, and turn on the power to operate normally.5. Make sure that the water pipe will not bend after installation.Precautionary measures:1. The pump must be placed in water to work normally, and the pump is designed for waterproofing.2. If the water volume is not large, please check whether the water switch on the water pump is turned on to the maximum.3. As long as the water is changed for 3-5 days, the pump can be cleaned in half a month, which can extend the service life of the pump.Packing List:1 x Desktop Fountain(Without Atomizer)1 x Power Cord1 x Simulation TreeNote:1. Turning on electricity before immersing in water may damage the product.2. Please turn off the power when not in use to extend the service life.3. Due to the problems of lighting effects and shooting angles, there will be certain tolerances in the product, please understand.4. Due to manual measurement, the product has some size tolerance.
Trustpilot
2 months ago
2 days ago