CKPSMS Brand - 1SET #KP-123 Sewing Machine Double Fold Clean Finish Top & Bottom Binding Binder Attachment (Tape Size 1-1/2" =38MM)

The media could not be loaded. I have a bernette coverstitch that has two holes but they were too far apart for this tool. We ended up drilling a hole our selves and using a different screw then the ones that came with it because it was too loose. Honestly the stitching came out beautifully. I give it a 5 star even though it has problems. This isn't for my machine but I didn't want to look for another tool so we had to do what we had to do which doesn't bother me at all as i sew. It gets the job done so I'm loving it

Works just like it says, just cut the strip according to the size indicated. Threading it through is the most difficult thing but once you get the hang of it, it works like a charm, I used my awl to start it. The stitching line is adjustable, it comes with screws to attach to your machine. You just adjust the alignment, sew slow for control. I am very happy for my purchase.

Four stars because it’s a great concept, but it doesn’t work with new Brother sewing machines or any plastic plated machine. Ended up returning to find a different option.

I was so excited to get this. I thought that this would make binding my quilts really easy. This did not work at all. It made the binding either really loose or it gathered on one side and puckered the edge of the binding or didn’t catch one side at all or both sides. I don’t know if I got the wrong size to try to find the quilt with but using regular fabric, this product does not work. I think that if the fabric were stiff that this would be fine but since regular fabric is not stiff, it does not work properly.

This is not an original or a branded product. It's kinda sturdy but it doesn't look good, it's probably made by a welder. It works to make 1/4" bias tape straight edge but it is not perfect. I haven't tried it in curves yet but I'm not excited about it.

The media could not be loaded. I have a juki Tl 18qvp. It fits perfect for the machine.I got it today and tested it out. Definitely have to cut your material on the bias (45 degree angle) for it to work properly.If you cut straight away instead of on the bias it creates puckers and doesn’t fold right. (Depending on the material.)The second photo is the back of the binding. The top is the first try and the second is second go around. I slid the binding foot which gave better results.The first photo is what the front of the binding would look.I gave it four stars because I do wish the foot fed through a little more evenly. But it definitely make my job easier. I did buy the 1 1/4” foot with this one so I might buy and even small size binder attachment to make thin spaghetti strap dresses.Side note The shipping was really fast as well.Edit: This is also my first time using a binder foot for a sewing machine. In my opinion it’s quite simple and easy to setup. Even without instructions.Edit: so i finally was able to use the .32mm binder foot and it is amazing. (See the photos/video of the red straps)As someone who runs a Made to order clothing business this helps a lot because I want my items to look as neat and as clean finished as possible.I didn’t cut the strips on the bias I just cut them straight up and down and they came out perfect.I am in love with the results and cannot wait to make some spaghetti strap sundress for the summer.

Thankful it was good quality made well was not bent which I was afraid it would come that way! The lord knows I needed it for a big project. Make sure you have screws for it. They don’t come with it.

Very well made. Easy to use, fits my Singer 99K and Consew Industrial machine.