The Unleashed Solid Stage 2 Kit for the Elite Alpha Trooper builds upon the power upgrade provided by the Stage 1 kit. The Stage 2 Kit replaces high-wear parts and increases performance further with its more efficient breech. When combined with the reinforced plunger and thicker o-ring, our Stage 2 kit helps you get the most out of the Elite Alpha Trooper’s available air volume. A metal trigger with the OMW logo is also included in this kit to add some flair to your blaster. You do not need to purchase the Stage 1 Kit in order to use the Stage 2 Kit, but it's recommended. WARNING - Some of our products may contain plastic wrapping and small metal parts that could present a choking hazard in young children. Product not intended for children under 8 years of age. Increasing the firing velocity of your blaster can result in injuries if not used with the proper respect. Have fun, but remember to use your blaster responsibly. Neither Orange Mod Works nor Hasbro, Inc. can be held responsible for injuries incurred due to careless blaster use. Orange Mod Works strongly suggests the use of safety glasses during use of your modified blaster.
N**K
Only worth about $10
Definitely not worth the money it costs. It improved nothing but the air seal because of the plunger rod.If I wasn't so lazy, I'd take it out of my blaster and return it...
J**N
disappointed
I got this kit for a replacement bolt sled ,I already had stage 1 installed(by the way,stage 1didn't break it,it was my stupidity,stage1 is awesome) and in the first 5 minutes of a war I went to the piece of plastic that holds the pin on the bolt snapped in two, the stock nerf one was better.
T**S
Three Stars
So hard to get the bolt sled pin in x,x
C**N
Bought this for my bf and a lot of the ...
Bought this for my bf and a lot of the pieces were warped or crooked but they worked with us and sent replacements
C**O
Minimal Performance Increase at the Cost of Reliability
While the product technically functions, the quality is surprisingly poor. The edges on the dart pusher near where the magazine rests looks like they were cut by a child, uneven, bits of plastic scraped off, generally very unprofessional looking. There were also cuts deep into the plastic that seem to serve no purpose. Inserting the pin to hold the pusher and sled together required a vice and a small punch and the screw required to hold the priming rod in place did not even come close to fitting and required drilling.Once installed, it seems like the product is a touch too short as it often fails to allow the pump grip to extend far enough forward to allow firing unless you really slam it forward. If/when you get it to catch, the slightest bump will knock it out of place leaving your blaster primed, but pulling the trigger will do nothing as the little plastic piece that releases the trigger catch cannot raise up enough to release the catch.There is also reportedly an issue with magazines being unable to fit inside the blaster with this kit installed. I did not run into this issue.Overall, performance did slightly improve but at the huge cost of reliability. I would not recommend this product in its current state. Just pick up a 5-7kg spring and call it a day. Very disappointing as I was waiting quite some time for this to be in stock.
A**R
Five Stars
Just as described, Thank You
Trustpilot
1 week ago
1 week ago
