Seville Classics AIRLIFT Pro S3 54" Solid-Top Commercial-Grade Electric Adjustable Standing Desk (51.4" Max Height) Table - White/Ashwood

First one come in with a stripped screw and can't even assemble. Put the 200lb trash back to packing and ordered an replacement.The second one worked for a week. And legs starts to raise unevenly. Had to move it to UPS and buy packages to ship it back. Don't waste your time on this thing.

I spent a lot of time reading reviews and trying to make sure I get what fits my needs and also is a good quality.1. This table is sturdy. It stands on a thick carpet and is super stable.2. Weight: it is heavy. However, I was able to assemble it myself and didn't need 2 people. Instruction says to attach the frame to the top and then lift the table with 2 people. All you need to if you don't have 2 people is to assemble the frame, stand it up and then put the top and secure it. Much more efficient and doesn't require 2 people.3. Assembly: super easy, everything is packed individually. As mentioned above you can assemble it without needing 2 people. Make sure you measure the width of the frame, secure that width, stand it up on the floor and put the top on and secure it.4. Quality: pretty good quality parts. My only reason for 4 stars is because one corner of the top was damaged/pressed and for the price you pay for this table, this is not acceptable. Other than that all parts are of a very good quality.5. Motor works beautifully and the table goes up very high. I'm 5'10 and it goes up so high I can barely reach the top with my arms extended. The motor is also very smooth and fairly fast.

This comes because my setup was NOT perfect. The unit came in, very sturdy, directions are super clear and easy to put together. When I was done it didnt work I had some error. I called and was told to email over some pics, which I did. I got a follow up a day later and they shipped me a new base it took a few days but it worked and the unit is super nice, smooth up/down and very sturdy.While its very sturdy I did notice the top is prone to denting without alot of push. i had to slide mine into the room (its very heavy) and i hit the corner of the wall and it dented pretty bad. I know I did it, but i wasnt 'running' into the wall. Overall though the curved desktop is SO much nicer than the square. This also goes to 48' which most do not.I am tall @ 6'4 and most of the others will not go this high. Anyone who is tall this is super important otherwise you end up leaning over just as if you were in a chair.

The description for this item is blatantly incorrect/confusing. The description says "Ergonomic table top with curved edge". Many of the photos, the 360 degree view, and many examples in the attached video show a curved edge on the front of the desk. Even the shipping box the desktop arrived in shows a picture with an ergonomic curved front edge. What I actually received was a simple rectangle desktop. The whole point of selecting this item over others was that it had the curved edge. If I had wanted a simple rectangle desktop there were lower priced alternatives. Confusingly, some of the photos do show a rectangle without the curved edge. Those are the correct ones, the curved ones are incorrect. I really wanted to like this desk., but I'm very dissatisfied with this purchase and will be replacing it with something else. I don't give many one-star reviews but this one worked hard to earn it.

I have been looking for a stand-up desk for multiple years. I finally caved in and purchased this item because I do a lot of sitting. This item comes in 2 boxes - both of which are quite heavy (>50 pounds). Additionally, it requires 2 people to lift the item and set up the item. The item on the flip side is extremely sturdy and well built. I thought this item (though costly) could alleviate some of the pain and stress on my back from long hours of sitting. This is not a comprehensive review, because I cannot recommend this item. My concerns are as follows:- I tried setting this item up, but I realized that it didn’t come with the better quality washers/bolt sleeves. In my opinion, it requires these bolt sleeves/washers because this item is extremely heavy. There are 6 connection points between the steel frame (approximately 76 pounds) and the item top (approximately 40 pounds). Consequently, upon tightening the bolts, I realized that the bolts could sink into the surface (top of the table) or be misaligned, which could potentially compromise the integrity of this item. Again, this concern is my opinion (based on setting up several items at home) without any structural engineering expertise. Others could see this issue differently and some might not view it as a concern. However, this is not the case for the following 2 concerns. I am not docking a star for this issue.- The anchors placed in the wood to hold the above-mentioned bolts came out for 2 slots (out of 6) while tightening which could compromise the integrity of this item. I had to glue the anchors back into the wood. This is a cause for deep concern. I am docking down 2 stars for this issue.- I couldn't find any technical instructions related to the 8 O (name of screws provided) screws. The 8 of them were supposed to be installed as connection points (making a total of 14 connection points) between the frame (bottom) and surface (top). However, I had to figure out myself. Again, cause for deep concern. I looked through the manual 4 times to see if I missed anything, but couldn't find it. No pages appear to be missing from my manual too. I am docking down another 2 stars for this issue.- The location of the controller is erroneously demonstrated in the technical instruction manual. After following the technical instructions and diagrams, I realized that the controller is underneath the table instead of on its side. However, please note that the pictures on the item page on Amazon have the controller in the right location.Conclusion: 1/5 stars. The above-described issues could result in a scenario wherein the improper attachment of the top and the bottom can potentially be hazardous because while turning the desk (after set-up for the right orientation) or regularly using it, the top/surface and the bottom/frame could potentially detach and seriously injure people.