Your car's sensor is fragile and over time may be damaged by jumping, knee contact on the seat or dropping liquids. Its repair is long and expensive, you have to uncover the seat, buy a new mat and re-upholster it. The defect in the mat will cause your Airbag light to come on, which means that you don't really know whether your Airbag will work or not in the event of an accident. In addition, the Airbag's light causes YOUR CAR NOT TO PASS THE ITV, even if it does not have any more defects. Instructions Installation is very simple. It will only take 1 minute. Generally, the light erases itself when you connect it. If this is not the case, remove the contact from the car and replace it and wait a few seconds, until the car performs the light test again. STEP 1: Pull the old mat connector and unhook it. STEP 2: Take the sent emulator. STEP 3: Insert the emulator into the plug in its only direction until the piece reaches the end. Finished process. IN CASE IT DOESN'T WORK, TRY TO ERASE THE ERROR WITH DIAGNOSIS MACHINE IF IT DOESN'T WORK IS THAT MAYBE YOUR CAR ISN'T COMPATIBLE. Valid for: BMW E36 (3) all models. BMW E46 (3) all models. BMW E39 (5) all models. BMW E38 (7) all models. BMW E53 (X5) all models. BMW E36 (Z3) all models. BMW Z4 (only models with metal keys). BMW E60 (only with metal keys), an additional module is needed (to deactivate the belt warning sound). BMW E65 (only with metal keys), an additional module is needed (to deactivate the belt warning sound). BMW E61 (only with metal keys), an additional module is required (to deactivate the belt warning sound).
Trustpilot
1 month ago
2 months ago